Learn How to Setup or Activate your CCcam Account /Server with Dreambox & Openbox

In my post earlier i talked about how you can setup your newly purchased or existing CCcam account to be up and running on your strong decoders. However in this post the focus shall be on how to do the same thing on Dreambox HD Decoders and Openbox decoders.

This is a total guide even for newbies and i shall be posting it with the aid of basic screenshots.Meanwhile to learn all you need to know about what a CCcam account is you can view my post here

Requirements:

Any compatible HD Decoders e.g Dreambox HD, openbox s10, s11 or its equivalent
2. 3g Router or equivalent.
3. Cross-over
Network Cable having Rj-45 Plugs
(used in connecting receiver to computer)
4. a Cccam Account that will give you Cccam.cfg 

Setting Up a CCcam Account  on Dreambox Receiver:
i. Connect DSL Internet line with Your
Dreambox and go to blue panel by pressing blue button on remote.
ii. Go to addons > Cam and Select CCcam 2.0.11 Complete or latest For Download and then install it.
iii. Then Enable AUTO CAM, From blue the Panel.
vi. After That Go to auto Cam and Change Default Cam to CCcam 2.0.11 or latest Which you installed.
v. Replace The CCcam.cfg  which was sent to you in VAR/ETC.
iv. For this You Need to Ftp to Dreambox . Connect Your Dreambox to Your Computer Using a Cross-over Network Cable having Rj-45 Plugs both sides.
iiv. After Connecting Your Dreambox to Your Computer , Open Lan Card Properties > TCP/IP Protocol Properties > Put IP 192.168.0.1 and subnet mask as 255.255.255.0 and then Close the tabs.
iiiv. Now in Dreambox go to Menu > Setup

xi.  Expert Setup > Comunication ..uncheck DHCP and put IP 192.168.0.2 and same subnetmask. and save it.
FURTHER SETTINGS TO BE MADE:   

i. Open Internet Explorer and type ftp://192.168.0.2/

ii.  Default Username: root Password: dreambox ,
open var folder then etc and replace or paste your CCam.cfg file .
iii. Then Plug the DSL internet line into Dreambox and go to Menu>setup>expert Setup>comunication
> .. Check DHCP and ENJOY Your Favorite Channels.

As for openbox syou need to complete the followings so that you can use it  with  cccam
accounts:

i.  connect your satellite LNB with your decoder
ii. use 3g router ,transfer internet to lan port internet ,connect  LAN INTERNET PORT with decoder
iii. connect  your TV with your decoder
iv Then set your CCCAM ACCOUNT into your decoder
Now  How to set cccam account into openbox s10:
1, download “cccam.cfg” file, overwrite the test account into it . save the changes.
2, add the cccam.cfg file to a USB Stick, do not zip the file, add it as is
3, goto Menu -> Network Local Settings and select CCcam Plug Setting and click the OK button
5, select CCcam,cfg [CCcam Plug] and  (this CCcam.cfg will be provided when you buy your cccam Account/ server) click the OK button, you should then see a check mark or tick appear, indicating you have selected the file, if there is no tick shown, then you have not selected anything,and nothing will be installed go over it and double check okay

6, if there is no tick displayed, select CCcam.cfg [CCcam Plug] and click OK

7. Once the tick is displayed, click the Yellow(Read ) button.Now select CCcam Plug Setting and click the OK button. as shown below

8. select the First option 1 .. CCcam.cfg and click the OK button.

9. Now highlight each cline you wish to activate, by clicking the OK button, a tick box will appear next to each cline you have activated.
10. Now check that your Network Settings are configured correctly

11. If your router supports DHCP turn it ON and click Apply.If your router do not support DHCP you will be
required to set it up manually, click Apply once you have set it up correctly  (I will advice you to get a 3g router that supports DHCP)

that is about all and if you encounter any problem with the above post do comment in the box below. Meanwhile you can get more of similar stuffs in our WEB FORUM for free. So if this post has come handy, why can’t you just share it with someone out there/

What is CCcam

ခုေနာက္ပိုင္း ေခတ္စားလာတဲ့ CCcam ဆိုတဲ့ Software ေလးကို
ကၽြန္ေတာ္ သိ္သေလာက္ ေျပာျပတာပါ

CCcam = Server ေထာင္သူမွ ေပးေသာ အေကာင့္ႏွင့္ အင္တာနက္ ဆိုတဲ့ ကြန္ယက္ နဲ႔ခ်ိတ္ဆက္ ရတာပါ

Server လုပ္ခ်င္၇င္ေတာ.
Cardsharing ဆိုတာကေတာ.ရွင္းပါတယ္ .....အခုေဘာ္ဒါတို႔ က dreambox 800hd ထည္းမွာ ရွယ္ျခင္တဲ့ ကဒ္ ကိုထည့္ထားမယ္ ၿပီး၇င္
ဒီကိုသြား ဒီsite ကိုသြား account ဖြင့္ၿပီးရင္ dmbox မွ cccam server မွာ host name .port တို.ကို မွႏ္ေအာင္ထည္. ဒါဆို မိမိ card က server ေ၇ာက္သြားၿပီး...server မွာ cline ကို username password ကိုကိုယ္ႀကိဳက္ တာေပးၿပီး ၇ွယ္၇ာလို.၇ပါၿပီ ကၽြန္ေတာ္လဲ dreambox မရွိေသးေတာ.လည္းဗ်ာ
သူမ်ား ဟာပဲ ၀ယ္သံုးေနရတယ္ အေတြ႕အႀကံဳ ၇ထားေအာင္လို.ေပါ့
Card ေတြလိုမယ္ဗ် .....cardsharing ဆိုေတာ.card ေတာ.လိုမယ္ share ခ်င္တဲ.
ကဒ္ေပါ. မ်ားမ်ားshare ခ်င္၇င္ေတာ. မ်ားမ်ားဆိုက္တဲ. card reader လာတယ္ဗ်
ကၽြန္ေတာ္ golden-mgcamd.net မွာေတြ.တာ 6 card 7 card ေလာက္ share လို.၇တယ္
၁ ကဒ္ေလာက္ပဲ ရွယ္ခ်င္၇င္ေတာ
Dreambox 500hd se
Openbox x5
Openbox s6000hd
နဲ.တၿခား card sharing လုပ္တဲ.စက္ေတြလည္းလာလိမ္.မယ္ဗ် forum ေတြမွာလိုက္ေလ.လာၾကည့္ၾကပါ
အဆင္ေၿပလိမ္.မယ္ဗ်
ေလာေလာဆယ္ OPENBOX နဲ႔ Sharing စမ္းခ်င္၇င္ newcam နဲ႔ စမ္းလို.ေတာ.၇တယ္ လုပ္နည္းကို Site တစ္ Site က ရွယ္ထားတယ္ဗ်
Howto make Openbox work a server

1. press menu
2. scroll down to Network Local Setting
3. press ok on remote
4.arrow right to Newcamd Server Settings
5. press ok on remote
6. enter newcamd server parameter
7 servversetting -ON-
8. TCP Port -eg. 13000- this MUST be forwarded in your router
9. Des Key 01020304055060708091011121314 Can be change to your own
10.add user in Newcamd server User manager with green button on remote
11. add username password allow emm yes
12. press yellow to save the configuration .

Now box is setup for server with 1 client and a reboot is always a good idea .
In the Client box with CCcam its the N: line to use for acces the server eg N: seerver_ip_or_dns Port user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

FREE CCcam.cfg cline ရွာနည္း

၁။Dyndns 12000 forum လို.ရိုက္ enter ေခါက္ပါ forum ေတြ cline ေတြ က်လာပါလိမ္.မယ္..ေ၇ွက္ေမြေပါ. cline ေတြအမ်ားၾကီး၇ပါလိမ္.မည္ အျခားဆိုက္ေတြလဲ ရွိပါတယ္
ရွာၾကည့္ေပါ့ဗ်ာ

၂။၇လာတဲ.cline ေတြက password မွားေနလား username name မွန္လား ့host ေသသြားၿပီလားစမ္း၇အံုးမယ္ ...စမ္းဖို.အတြက္က

ဒီမွာႏွိပ္

ဒီ site ကို သြားပါ ။အေစာက၇လာတဲ. cline ေတြကို copy လုပ္ box ထည္းကို paste လုပ္ၿပီး process လုပ္ပါ စိမ္းေန၇င္ Ok ၿပီ ... ကၽြန္ေတာ္တို႔ အာရွ ဘက္က Free ရတာေတာ့ရွားတယ္ဗ်

က်ြန္ေတာ္ညာဏ္မွီသေလာက္ share ေပးၿခင္းသာၿဖစ္တဲ.အတြက္ အမွားပါ၇င္ခြင္.လြတ္ေပးၾကပါ